Friday, April 2, 2010

Steering Installed

Got the quickener back and installed. It did require a bit more "modifying" and tweaking than I would of expected for spending 500$, but whatever - it's in and it's working. The only hesitance I have is the brake pedal hits the planetary gear housing. That being said, the brake system is not bled which will dramatically impact how far/close to the floor the pedal goes. Larry from L&E Fabrication said it is normal and I won't have any problems. I hope he's right.

Also added another Lexan window to the drivers side and started to modify the headers for startup. The Ebay knockoffs I purchased were mislabeled on the site. They are made for the earlier 2.2 style motors which has a different head design - the distance between the L and R head ports is more narrow - so I have to extend them. It was also mislabeled as the size of the ports are NOT 1.5" they are 1.75" - which means the stainless pipe I bought to modify the headers - is wrong. I'll be looking for more steel.

Thursday, April 1, 2010

Side Windows + Steering

The next logical step to installing the rear window is the sides. Let me just say - the rear window was a pain in the arse compared to the sides. So much easier to cut, fit, and install. The only bad thing is where I'm mounting the lexan to - I'm screwing into the B-Pillar and I underestimated the structural integrity of it lol. Thin (aprox 14 gauge) steel is no problem, but these B-Pillars have triple and quadruple walled crazy engineered steel which requires me to drill it out. Self tapers have no chance lol.

Also received my steering column - before I installed it I did a final paint and prep on the floor and on the dash beam just to make sure that I wasn't going to hate my life later. It's much easier to get to everything with the windshield out. Paint looks nice, but I could only really afford to do the front to reduce the time I spend on this beast. Anyway - Tried to install the column and it's hitting some crap - I'll have to do more cutting/modifying.

Wednesday, March 31, 2010

Lexan

Last night I started working on the Lexan windows. It's a bit more work than I expected mostly because I only have a pair of metal shears to cut the stuff. Luckily, it's only 1/16" thick so it's not too bad. I used a cardboard template of the glass window to start my cutting. I added about 1/4" to the outside of the template for some wiggle room, but found I didn't need it in the end. It was extra cutting, but adding material is always the hard part when you cut something too short haha. The fitment is ok, nothing spectacular, but I think it will look ok when I put the trim back in and seal it down. I fastened it with some self tapping, hex head screws which I popped right into the metal window frame in the body. 1 down - 4 to go.

Tuesday, March 30, 2010

Window Net, Sunroof, and Roll Center

Last night was wet... of course... But I did have a good visit from Sean. He came over to finish a few pieces of the cage. Primarily, he was assembling the window net brackets. I won't need it right away, but I figure what the heck - might as well have it there for when I need it. The process went fairly smoothly from what I heard/saw - we will need one other little piece to the net to make sure it drops away quickly in an accident. Today's task will be to try to find a place around here who sells 1/4" thick flat stock steel for the seat brackets.

While Sean was swearing at the window net, I took the time to uninstall my stock ball joints/tie rod ends and install the new roll-center kit I purchased. Even with the Tarmac 2 ride height set to "normal" the a-arms do sit a bit higher than horizontal which alarms me. I want to keep the suspension as flat as possible to reduce binding. This system should lower the ball joint and keep the arm flat - same principal with the tie rod end.

After all the fun - I brought Sean back to DSX and he cut me up a nice piece of aluminum for the roof to cover the sunroof hole. Sean built a pattern

Monday, March 29, 2010

I hate painting

So it seems like it would be easy right? Just slap some paint on the cage and be done with it. I wish.
I spent a good 5+ hours so far prepping and priming the cage and other bare metal pieces on the chassis. As I mentioned in previous posts, I didn't like building cages due to my lack of patience, same goes for painting them haha. I do need to make sure this very expensive asset doesn't get eaten by mother nature though, so I endured. I'm using a flat black primer on pretty much everything for now. A lot of the interior will be gray, but flat black is a good alternative so I can protect the items, reduce the glare, and not have to worry about putting 50000 hours into paint work. My buddy who has a paint booth offered to help - I think I'll take him up on it haha.

Sunday, March 28, 2010

Back from Houston

Week delay is due to my job - I guess I have to continue to earn an income while I blow it all on this car right? Anyway - started to prep and paint the cage - Doug came over and was scrubbing away with a rough scotchbright pad. I'm going to do the floor and the majority of the cage with a gray and the rest and critical "reflective" points (Rear deck and A-Pillars) in a flat black. I also need to fix all the holes in the floor - another excuse to use my plasma cutter! :)

Friday, March 19, 2010

Paint and Window Prep

I started to put all the goodies in the motor and get ready to start it up - then I realized... I don't have a steering column! Ah well, I'm dumb - and I didn't feel like hot-wiring the car on initial start up so I moved to putting some of the minor components back in.

I wanted to put the peddle box back together so I could have a clutch and such - but I realized, if I do that - I can't paint the floor. So - I grabbed some flat black Rustoleum "Rust Converter" paint and went to town. I prepped the surface with a scotch bright pad and cleaned it up with some acetone. after I was sure it was fully evaporated and dry, I sprayed on the paint then installed the peddle box.

At the same time I had the paint out I figured, what the hell - Might as well paint the window frames where I messed them up using the braided wire. I masked off a nice area around making sure to keep the paint off the main body and went to town. I figure when I install the Lexan it will almost appear to have a smoked look like the stock windows (from afar anyway).