...see new parts on the table! - My D-Ring kit came (for the Hans) and my wide, 17" rear view mirror. I've used these mirrors before on my endurance car and they are awesome. You almost don't even need side mirrors as they let you see almost 2 lanes to the left and right. New Jersey Motorsports Park isn't going to work out - I was on the waiting list and no one canceled (despite the impending rain...) Oh well - Next event will be an Auto-X next weekend then on to Monticello in NY first week of May.
Friday, April 16, 2010
Nice to come home and...
...see new parts on the table! - My D-Ring kit came (for the Hans) and my wide, 17" rear view mirror. I've used these mirrors before on my endurance car and they are awesome. You almost don't even need side mirrors as they let you see almost 2 lanes to the left and right. New Jersey Motorsports Park isn't going to work out - I was on the waiting list and no one canceled (despite the impending rain...) Oh well - Next event will be an Auto-X next weekend then on to Monticello in NY first week of May.
Monday, April 12, 2010
First Race
So I dropped her off the jack stands and took her for a spin in the driveway. She works! - No additional problems, actually sounds a lot quieter than I expected (with solid bushings). Eagerly anticipating my Sunday deadline I washed her up and made some minor tweaks to interior. I put my race numbers on the side and pulled her on the trailer.5am on a Sunday is not my ideal time to wake up but I was very excited. a 2 hr drive up to Devins Air Force Base was pretty quick seeing Jeff and Todd were "late". They tended to motivate my right foot a little.
Despite the horrid SCCA format for their auto-x and the 6 hours of waiting around I did before I ran the car - oh my word did the car handle. I had a few people ask me "Is this on slicks?" (It's not by the way, haha.) The turn in on the car is ridiculous - not like any Subaru I've ever driven. It's very neutral and rotates on command. The motor held together after being beaten off the rev limiter a few times and feels very, very strong. The power band feels very linear and I caught myself wondering where I was on the tach just because the TQ was so sustained.Needless to say I'm a happy camper. Now we prep for New Jersey Motorsports Park.
Friday, April 9, 2010
Clean Up
Last night I just spent some time working on my short list of "things left to do". I fastened the fuel and brake lines to the chassis and pulled them away from the driver/passenger's legs. On the fuel side I separated the main high pressure line from the return/vent lines just for the heck of it. Figured it would reduce any wear/breaks. I then moved to securing the interior wiring harness. Wrapped a a lot of the exposed parts in electrical tape and fastened it to the chassis. I also modified the seat bracket for the drivers seat to move it a bit closer to the pedals and bought some grade 8 hardware. Fixed the trim and I picked up my newly painted hood elements and fog covers.
Thursday, April 8, 2010
Another Late Night
So I'm down to the short list - tied up a lot of loose ends last night. Jack came over again and helped dial in the alignment now that the suspension bits are properly adjusted and modified. WRX axles were added to the rear (I was maxing out the RS axles). I laid out the harnesses to map out where I want to run them and reassembled the steering column electronics (headlights and wipers). I cleaned up the engine bay adding the timing belt cover and fabricating up a bracket to hold the power steering reservoir. Now I have to buy a few more minor things (trunk gasket, rear view mirror, bulbs for the brake lights, etc.)

Oh and you have to have a race dog :P
Wednesday, April 7, 2010
Dumb...
Note to self - "When raising the rear sub frame up - check to make sure things aren't going to be crushed due to lack of room!" - Last night I fixed up the brake line that broke. I had to drop the rear sub frame and remove the passenger side straps off the gas tank just to replace this hard line. The issue was when I raised the sub frame up 1/4 inch or so, I neglected to see there was a brake line run in a very tight area between the frame and sub frame. I ran a new line (with the help from Doug - he loves coming over and removing/installing sub frames) and put everything back where it was.
After everything was bolted back up I figured, what the hell it's 1am anyway, why not install the rear Lexan window. Done and done... Now I need to figure out how to attach the stock trim pieces...
Tuesday, April 6, 2010
Dialing in
So my time on Sunday was spent "getting" the car aligned - well it didn't work out as well as I would have hoped. We ran into some snags in terms of tire clearance and such so I brought her home and started to fix the issues. Jack from EFI Logics swung by to give me a hand.
The biggest pain in the butt was the rear springs - RaceComp Engineering gave me a 6" 340 in/lb rate rear setup with a helper that compresses to about 1 3/8" - I needed about 2" of extra clearance on the inside of the tire to be able to move the wheel under the fenders appropriately. We removed the helper and jacked up the springs and got the room we were looking for. After the spindle/strut was set, we set the camber plates to the middle (to give me adjustability out and in) and then shortened up the lateral links to pull the bottom of the tire under the car. Very effective - Jack really knows his stuff. (And I might add - Myles from RaceComp was VERY understanding about my situation and is going to ship over new springs/helpers to fix the clearance issue - Thanks!)
Moving to the front the camber plates I installed add caster when you add camber. Although that's nice - I think it will hurt adjustability on the track. We decided we'd just re-drill the strut towers to the "GD" style which allowed me to mount the plates where they will only add/remove camber without effective caster at all.
And then to top it off - I made my nice ABS plastic insert to mount the gauges :)
The biggest pain in the butt was the rear springs - RaceComp Engineering gave me a 6" 340 in/lb rate rear setup with a helper that compresses to about 1 3/8" - I needed about 2" of extra clearance on the inside of the tire to be able to move the wheel under the fenders appropriately. We removed the helper and jacked up the springs and got the room we were looking for. After the spindle/strut was set, we set the camber plates to the middle (to give me adjustability out and in) and then shortened up the lateral links to pull the bottom of the tire under the car. Very effective - Jack really knows his stuff. (And I might add - Myles from RaceComp was VERY understanding about my situation and is going to ship over new springs/helpers to fix the clearance issue - Thanks!)
Moving to the front the camber plates I installed add caster when you add camber. Although that's nice - I think it will hurt adjustability on the track. We decided we'd just re-drill the strut towers to the "GD" style which allowed me to mount the plates where they will only add/remove camber without effective caster at all.
And then to top it off - I made my nice ABS plastic insert to mount the gauges :)
Monday, April 5, 2010
8 hours of sleep in 3 days
This
weekend was nice, warm temps, sunny - and without sleep for me. I pulled an "all-nighter" Friday into Saturday trying to prepare for an alignment at EFI Logics in Bethel, CT. So besides the exhaustion - I made quite a bit of progress on the car.
First and foremost the engine runs! By 4am Saturday morning I was able to modify some Ebay stainless steel headers to extend them
past the turbo cross member. The work was a little "rushed" but it came out ok. The headers are very low now so I may end up raising them up another 1/4" to 1/2" but I need to be sure they don't rub on the cross member and cause false knock readings. After cranking the motor for about 20 minutes to lube everything up - I connected the engine electrical and hit the juice - Bam started up within 2 cranks - perfect. Runs good, no weird noises - The car drives - but I still need to do a bit of work on a broken brake line which is 1) a hard line and 2) ABOVE the rear cross member (uggggg....).
Installed some hood pins to eliminate the hood latch and assembly off the nose of the car - Boy was that nerve racking at 6am drilling into my JDM Aluminum v6 hood. Once I figured out where the holes go it was cake from there. the biggest pain in the butt is just getting it all to line up properly.
After all said and done I pulled the car out of the garage and got 50 feet before a maxed out a rear axle and caused the diff to lock up hard. I had to remove the rear axles just to move the car on the trailer. Once loaded we were off to EFI to get the car aligned.
At EFI I noticed a scraping noise coming from the rear which was accompanied by 5 guys saying "Wow this car is hard to push, is the e-brake stuck?" Turns out I grabbed bolts for the rear calipers which were about 1/16" too long... I'll blame it on my delirious, sleep deprived state. Once fixed, we rolled the car up on the lift and Jack proceeded to fix her up. (also had a front windshield installed while I was there).
weekend was nice, warm temps, sunny - and without sleep for me. I pulled an "all-nighter" Friday into Saturday trying to prepare for an alignment at EFI Logics in Bethel, CT. So besides the exhaustion - I made quite a bit of progress on the car.First and foremost the engine runs! By 4am Saturday morning I was able to modify some Ebay stainless steel headers to extend them
past the turbo cross member. The work was a little "rushed" but it came out ok. The headers are very low now so I may end up raising them up another 1/4" to 1/2" but I need to be sure they don't rub on the cross member and cause false knock readings. After cranking the motor for about 20 minutes to lube everything up - I connected the engine electrical and hit the juice - Bam started up within 2 cranks - perfect. Runs good, no weird noises - The car drives - but I still need to do a bit of work on a broken brake line which is 1) a hard line and 2) ABOVE the rear cross member (uggggg....).Installed some hood pins to eliminate the hood latch and assembly off the nose of the car - Boy was that nerve racking at 6am drilling into my JDM Aluminum v6 hood. Once I figured out where the holes go it was cake from there. the biggest pain in the butt is just getting it all to line up properly.
After all said and done I pulled the car out of the garage and got 50 feet before a maxed out a rear axle and caused the diff to lock up hard. I had to remove the rear axles just to move the car on the trailer. Once loaded we were off to EFI to get the car aligned.
At EFI I noticed a scraping noise coming from the rear which was accompanied by 5 guys saying "Wow this car is hard to push, is the e-brake stuck?" Turns out I grabbed bolts for the rear calipers which were about 1/16" too long... I'll blame it on my delirious, sleep deprived state. Once fixed, we rolled the car up on the lift and Jack proceeded to fix her up. (also had a front windshield installed while I was there).
Subscribe to:
Posts (Atom)
